< Back

General situation of fluorine ball valve and plug valve is the same type of valve, the difference is that the ball is with a circular ball for opening and closing parts, the ball with the stem around the center line of the valve to achieve the purpose of opening and closing the valve. Fluorine ball valve is with circular holes for the opening and closing of the ball, the ball with the valve stem around the center line of the valve to achieve the valve open and close. Using a special molding process, so that a good sealing surface density, in addition to V type PTFE packing of the valve to achieve zero leakage; ball and stem cast as a whole, to eliminate the pressure caused by the change of stem out the possibility of pressure within the case, the fundamental guarantee for the safety of use; the plastic lining process, strong corrosion resistant media.。

Manual

Q41F3（fully lined） 

Pneumatic 

Q641F3（fully lined） 

Q41F6（fully lined） 

Q641F6（fully lined） 

Worm gear 

Q341F3（fully lined） 

Electric

Q941F3（fully lined） 

Q341F6（fully lined） 

Q941F6（fully lined） 

Note: parameters are for reference only, or are not full. Valve can be used in accordance with the requirements of different pressure, material, caliber. Specific please contact or online advisory contact.

Copyright All © ZSHFM