The utility model not only can maintain the air pressure balance of the storage tank, ensures that the tank is damaged in the overpressure or the vacuum, but also can reduce the volatilization and the loss of the medium in the tank. The valve is installed in the nitrogen sealed tank top, tank pressure is to maintain balance, reduce product safety and energy saving medium volatile, often associated with the use of flame arresters. The valve is mainly used for the recovery of environmental pollution and endanger the safety of toxic and harmful gases.
1, storage: the above products are shipped to the site, if not installed or after the factory overhaul, rainproof facilities should be stored in a warehouse; emergency vent manhole series products not inverted during transportation.
2, maintenance:
A, the breathing
A, the breathing valve series, the staff should be monthly on the tank top check, check valve plate, valve seat, valve stem, valve cover and other parts of any dust, dirt, if any, should be clean dry static; every six months, to the valve sleeve and the valve rod wipe of transformer oil.
B, each half staff should check the fire breathing valve of the fire resistant layer at a time, if there is dirt, impurities clogging the fire resistant layer, fire resistant layer should be removed, remove stains with corresponding solvent, then rinse clean dry static fire resistant layer, put into the housing in the ventilation drying after.
C, more than the product shell inside and outside the surface of the paint should be re painted every year again.
壳体材质:碳钢、不锈钢(SUS304、SUS304L、SUS316、SUS316L)、衬氟、塑料。
内部芯件:阀盘、阀座、阀杆、阀套。
内部芯件材质:不锈钢或聚四氟乙烯。
密封圈材质:聚四氟乙烯。
阻火层材质:不锈钢。
环境温度:-40~+60℃。
我公司生产的呼吸阀,具有结构紧凑,通气量大,泄漏量小,耐腐蚀,密封性能好等特点.最近又开发了具有国际先进水准的防爆阻火器呼吸阀(HXF-IZ型),阻火器位于呼吸阀吸入口处,杜绝火源进入呼吸阀壳体内.具有体积小,重量轻,检修,清洗,更换方便等优点等特点。
阀盘采用聚四氟乙烯材料,具有耐低温,防冻等优点。阀内设静电输出装置,使得该阀时刻与罐体保持等电位。
操作压力:
A型:+355Pa(+36mmH20)、-295Pa(-30mmH20)
B型:+980Pa(+100mmH20)、-295Pa(-30mmH20)
C型:+1750Pa(+180mmH20)、-295Pa(-30mmH20)
D型:特殊压力,用户指定。
防爆级别:BS 5501:IIA、IIB、IIC。