It is mainly used in the bottom discharge, discharge, sampling and non dead zone shutdown operation of the reactor, tank and other containers. With the valve at the bottom flange welded to the bottom of tanks and other containers, thus removing the process medium is usually left in the container export. Discharge valve according to the actual needs of the situation, put the end of structural design for the flat type valve for the V type, and provides two modes to enhance and decrease the valve.
Note: parameters are for reference only, or are not full. Valve can be used in accordance with the requirements of different pressure, material, diameter, drive, etc.. Specific please contact or online advisory contact.
下展式放料阀,耐腐蚀性:1.使用介质如水、丙酮、酒精、氨、碳酸钡、苯(WCB材质的温度使用-29℃-425℃)。2.严禁使用含氟离子液体(如HF等)也不能用强碱及磷酸(温度小于150℃,浓度>30%)。3.不锈钢的一般工作温度≤150℃,压力范围0.6-2.5MPA,超过此规定订货时要说明。