Use: This valve is specially used to control non corrosive or general corrosive medium, the inner surface of the valve body is not lined or covered with various rubber, which is suitable for different working temperature and fluid pipeline.
Note: parameters are for reference only, or are not full. Valve can be used in accordance with the requirements of different pressure, material, diameter, drive, etc.. Specific please contact or online advisory contact.
Body: cast iron, nodular cast iron, carbon steel, stainless steel
Valve cover: cast iron, nodular cast iron, carbon steel, stainless steel
Lining: no lining, rubber
Diaphragm: Rubber
Valve: Cast Iron
Stem: carbon steel, stainless steel
Hand wheel: Cast Iron
Lining layer: electric spark detection
Test and inspection according to GB/T13297 standard
Nominal pressure: PN (Mpa)
Body: PN * 1.5
Seal: PN * 1.1
|
DN
mm
|
Nominal pressure
MPa
|
Working pressure
MPa
|
L
（mm）
|
D
（mm）
|
D1
（mm）
|
n-φd
（mm）
|
F
（mm）
|
H1
（mm）
|
H2
（mm）
|
D0
（mm）
|
quality
|
|
25
|
1．0
|
1．0
|
160
|
96
|
115
|
85
|
4-14
|
108
|
120
|
66
|
5．5
|
|
32
|
|
|
180
|
118
|
135
|
100
|
4-18
|
138
|
157
|
96
|
8．5
|
|
40
|
|
|
200
|
135
|
145
|
110
|
4-18
|
147
|
167
|
96
|
12．5
|
|
50
|
|
|
230
|
150
|
160
|
125
|
4-18
|
167
|
192
|
96
|
17
|
|
65
|
|
|
290
|
182
|
180
|
145
|
4-18
|
194
|
229
|
165
|
24．5
|
|
80
|
|
|
310
|
210
|
195
|
160
|
4-18
|
212
|
252
|
230
|
33．5
|
Diaphragm valve is a special form of globe valve;
1, elastic seal open and close parts, ensure no internal leakage;
2, streamlined runner, making the pressure loss small;
3, no stuffing, so no leakage;
4, the valve body and the cover is separated by the middle diaphragm, so that the diaphragm above the valve cover, stem parts from medium erosion;
5, diaphragm can be replaced, low maintenance costs;
6, lining material diversity, can be applied to various media, and has good corrosion resistance.
简体中文版
English
